Peanut grader is mainly used for size grading of peanut kernels, almonds and other nuts, and it is the supporting equipment of the nut shelling machine. The peanut sorting machine uses the characteristics of different sizes of nuts, and uses the size of the sieve hole to classify the nuts.
Instructions
- Before using the peanut grader, it is necessary to check whether the main components are damaged, whether the connecting parts are loose, and whether the electrical switches and circuits are in good condition.
- Turn on the machine first, and then work after the operation is normal.
- The output speed should match the screening and grading speed. so as not to cause extrusion.
- The sieve should be replaced according to the size of the nuts. The lower sieve is equipped with a 3 mm sieve to separate the nuts from the residue without replacement.
- Each bearing should be lubricated frequently to prevent bearing damage.
- There is no gap between the rubber bearing and the shaft sleeve of the swing mechanism of the peanut classifier. It mainly relies on the weak action of rubber to swing. Therefore, there may be signs of fatigue and aging, and attention should be paid to replacement during maintenance.
Structure and performance of peanut grader
This Peanut Kernel Grading Machine is mainly used to screen peanut kernels of different sizes, almonds, hazelnuts and other nuts into three or more grades of large, medium and small. This is convenient for storage and sale. The peanut grader is composed of one, two and three vibrating screens, which can be screened and graded at the same time at one time. The machine can control the speed of feeding and the effect of screening and separation by adjusting the angle of the vibrating screen body. The movable sieve has a sieve hole of 6 to 10 mm. We can replace the sieve according to different nuts to screen out the nuts that meet the size.